Giriş Yap

Head and leg rest and height adjustments can be performed through nurse panel and side rail controllers by means of electrical motors.  Also, the actions that the patient can command can be limited with the nurse panel, which is designed for the sole use of nurses.

The main frame of our bed is constructed from profile and it consists of two main parts, which are lower carriage trolley with castors and upper mattress platform.  Mattress platform consists of four parts which are made of ABS press panel. Headboards are made of polyethylene (PE) material in a single piece and can be easily removed and re-mounted. There are rotating plastic bumpers in four corners of the bed for protection against impacts. Beds are fitted with direction locked 125 mm castors with central locking system. All metal parts of the bed are covered with electrostatic powdered paint.  One chrome-nickel plated I.V. rod with height adjustment is given with each bed as a standard.

Trendelenburg – Reverse Trendelenburg

In case of emergency and in the time of need, trendelenburg position may be given to the bed by the help of gas-spring clamp mechanism at the leg end of the bed.

C.P.R. Handle

In case of emergency, backrest can mechanically be reclined from upright position to fully horizontal position by pulling the handle which is connected to backrest motor.

Castors and Adjustment Pedal

Using the castor adjustment pedal at the leg end of the bed, the castors can be adjusted to three positions: swivel, total lock and direction lock.

Nurse Panel

Nurse Panel can be hidden under the bed. It is only to be used by a nurse. It can limit the functions which can be performed by the patient through the handset. All positions can be performed. The nurse controller panel is offered as a default option, and the battery is optional.

Side Rails

Four independent side rails move in synchrony with the bed. They can be hidden under the bed when they are not used.