Head and leg rest adjustments can be performed through side rail controllers by means of electrical motors
The main frame of our bed is constructed from profile and it consists of two main parts, which are lower carriage trolley with castors and upper mattress platform. Mattress platform consists of four parts which are made of ABS press panel. Headboards are made of polyethylene (PE) material in a single piece and can be easily removed and re-mounted. There are rotating plastic bumpers in four corners of the bed for protection against impacts. Beds are fitted with 4 125*30 mm castors, two of which have breaks. All metal parts of the bed are covered with electrostatic powdered paint. One chrome-nickel plated I.V. rod with height adjustment is given with each bed as a standard.
Trendelenburg
In case of emergency and in the time of need, trendelenburg position may be given to the bed by the help of gas-spring clamp mechanism at the leg end of the bed.
C.P.R. Handle
In case of emergency, backrest can mechanically be reclined from upright position to fully horizontal position by pulling the handle which is connected to backrest motor.
Side Rails
Four independent side rails move in synchrony with the bed. They can be hidden under the bed when they are not used.
Dimensions (mm) D-2761 Overall 1020 x 2180 Mattress Platform 900 x 1900 M.P.’s Height from the Ground Features D-2761 Back Rest Adjustment Electrical Motor Leg Rest Adjustment Electrical Motor Trendelenburg Available Reverse Trendelenburg Not available Height Adjustment Not available Side Railing 4 Side Railings
